M.2 M-key to 5-port SATA III 6Gbps Expansion Adapter Card

$48.00

  • Product Code: ADP-M2M-5SA
  • Availability: In Stock

ADP-M2M-5SA is a M.2 M Key to SATA Converter (5 x 6G Stacked Ports) using the PCIe 3.0 x2 channel with the theoretical speed of 6Gbps. Using the JMB585 chipset, the ADP-M2M-5SA can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA III 6Gb/s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

Features

  • Compliant with M.2 Key M standard
  • Supports up to two lane of PCI Express
  • Transfer protocol: PCI Express x2
  • Complies with PCI Express Base Specification Revision 3.1a
  • Supports PCIe Link layer power saving mode
  • Supports 5-SATA Port
  • Each SATA Port transmit speeds up to 6Gbps
  • Support command-based and FIS-based of Port Multiplier
  • Complies with SATA Specification Revision 3.2
  • Supports AHCI mode and IDE programming interface
  • Supports Native Command Queue(NCQ)
  • Supports SATA Link Power saving mode(partial and slumber)
  • Supports SATA plug-in detection capable
  • Supports drive power control and staggered spin-up
  • Supports SATA Partial/Slumber power management state
  • Plug-and-Play Supported, no additional software installation or settings required
  • This card is only design for storage use only, can not boot any OS / System

Specifications

  • Control Chipset: JMB585
  • Host Bus Connector: M.2 M-Key
  • Bus Standard: PCI Exrpess x2, Revision 3.1a
  • Connector: 5 * SATA (7 pin, Data)
  • Data Rate: Supports communication speeds of 6Gbps, 3Gbps, 1.5Gbps

Package Contents

  • 1 x M.2 Key M to SATA 3.0 Expansion card
  • 1 x Manual
  • 5 x SATA Cable

Write a review

Note: HTML is not translated!
    Bad           Good