Single Fiber Fast Ethernet Standalone WDM / BiDi Fiber Media Converter, 1-port Fiber & 2-port RJ45, Tx:1490nm/Rx:1550nm, Singlemode, 80km

$98.00

  • Product Code: FMC-FEBSA-1F2T-4955S80
  • Availability: In Stock

Available Options

This Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. Extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. Enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). Supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber.

Features

  • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x auto-negotiation
  • Extends distances ranging from 2km (multi-mode fiber) to 120km (single mode fiber)
  • Auto-negotiation support on RJ-45 port
  • Auto-negotiation of duplex(HDX/FDX) on RJ-45 port
  • Auto MDI/MDI-X support on RJ-45 port
  • Status LED's for TX,FX LINK/ACT, POWER, 100M to easily monitor network status
  • External power supply
  • Supports packet length up to 1600 bytes
  • FCC Class A & CE approved

Specifications

Parameter

Specifications

Access Mode

10/100Mbps

Standards

IEEE802.3 10Base-T, IEEE802.3u 100Base-TX ,100Base-FX

Wavelength

Tx:1490nm/Rx:1550nm, Singlemode

Distance

Category-5 twisted pair: 100m
Fiber: 80km

Interface

2 x Ethernet port (RJ45) 10/100Base-Tx
1 x Optical port (1x9) 100Base-Fx: Simplex SC/FC/ST

Conversion Means

Media conversion, store-and-forward/cut-through

MAC Address Table

1K

Buffer Space

1Mbit

Flow Control

Full duplex: flow control;
Half duplex: back pressure

Delay

Store-and-forward: 9.6µs; cut-through: 0.9µs

BER

<19-9

MTBF

100,000 hours

LED Indicators

Power, FDX, Status, Speed, FX Link/Act, TX Link/Act

Power Supply

DC5V 1A (external), AC220 0.5A/DC-48 (internal)

Power Consumption

5W

Operating Temperature

-10~60ºC

Operating Humidity

5%~90% RH

Maintaining Temperature

-40~70ºC

Maintaining Humidity

5% ~ 90% RH


Applications

1. Extend the network distance between two UTP switches

Two Fast Ethernet Media Converters can extend the distance between UTP Switches across a fiber link up to 120km in length.

2. Interconnect a UTP Switch with a Fiber Switch

A media converter can interconnect a UTP copper based Switch port to a remote switch that has integrated fiber.

3. Direct Connection between two remote devices

With a pair of Fast Ethernet Media Converters two devices, such as file servers, can be connected up to 120km away across a fiber link.

4. Enterprise Infrastructure using Fiber Optics

Create a fiber infrastructure for your enterprise network without any wholesale replacement of existing copper-based equipment.



Write a review

Note: HTML is not translated!
    Bad           Good