2-port FE SFP & 4-port 10/100Base-T RJ45, Fast Ethernet Switch / SFP Media Converter

$46.00

  • Product Code: FMC-FESA-2SFP-4T
  • Availability: In Stock

Compufox's Fast Ethernet SFP Media Converters extend copper to fiber, multimode to multimode and multimode to singlemode fiber. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by Compufox, Cisco, HP or other manufacturers of MSA compliant SFPs.

Compufox has an extensive range of SFP Media Converters to meet every fiber conversion need.

Features

  • SFP slot for Compufox and other industry standard SFPs
  • Extend network distances up to 120km
  • Multimode and single mode fiber
  • 10/100Base-TX to 100Base-X Fiber
  • Supplies IEEE 802.3 PoE & PoE+ PSE power
  • Compatible with legacy pre-standard PoE devices
  • Advanced features: PD Reset, Smart Link Pass-Through, Fiber Fault Alert, Auto-MDIX and Loopback

Specifications

Parameter

Specifications

Access Mode

10/100Mbps

Standards

IEEE802.3 10Base-T, IEEE802.3u 100Base-TX ,100Base-FX

Transmission Distance

Category-5 twisted pair: 100m
Fiber: up to 120km

Interface

4 x Ethernet port (RJ45) 10/100Base-Tx
2 x FE SFP slot

Conversion Means

Media conversion, store-and-forward/cut-through

MAC Address Table

1K

Buffer Space

1Mbit

Flow Control

Full duplex: flow control;
Half duplex: back pressure

Delay

Store-and-forward: 9.6µs; cut-through: 0.9µs

BER

<19-9

MTBF

100,000 hours

LED Indicators

Power, FDX, Status, Speed, FX Link/Act, TX Link/Act

Power Supply

DC5V 1A (external), AC220 0.5A/DC-48 (internal)

Power Consumption

5W

Operating Temperature

-10~60ºC

Operating Humidity

5%~90% RH

Maintaining Temperature

-40~70ºC

Maintaining Humidity

5% ~ 90% RH


Applications

1.
Extend the network distance between two UTP switches

Two Fast Ethernet Media Converters can extend the distance between UTP Switches across a fiber link up to 120km in length.

2. Interconnect a UTP Switch with a Fiber Switch

A media converter can interconnect a UTP copper based Switch port to a remote switch that has integrated fiber.

3. Direct Connection between two remote devices

With a pair of Fast Ethernet Media Converters two devices, such as file servers, can be connected up to 120km away across a fiber link.

4. Enterprise Infrastructure using Fiber Optics

Create a fiber infrastructure for your enterprise network without any wholesale replacement of existing copper-based equipment.



Write a review

Note: HTML is not translated!
    Bad           Good